1.
Steve’s Turbine Powered Airboat Project
Build an airboat powered by a turboshaft engine and a variable pitch propeller ... The governor trim control is electric. This is an interesting piece of ...
2.
Team Scavenger's Heavyweight - Condor
The first part we selected from our pile is a General Electric jet engine starter motor. This thing develops Etek-like power on only 24 volts and has a set ...
3.
Steve’s Turbine Powered Airboat Project
Build an airboat powered by a turboshaft engine and a variable pitch .... Though certified for fuel on an airboat engine, the valve was not rated for the ...
4.
Steve’s Turbine Powered Airboat Project
I mounted it on a test stand, attached a $49 transmission cooler and hooked .... being replaced by the more powerful J85 on the C123K of Air America fame. ...
5.
Steve’s Turbine Powered Airboat Project
Build an airboat powered by a turboshaft engine and a variable pitch ... Locate or build an airboat hull of proper size and weight for the thrust produced. ...
6.
Team Scavenger's Heavyweight - Condor
Two Astroflight 112D chargers, Tower Hobbies, $280. 13.8V 25A power supply, ebay, $30. 19 ft titanium tube, Titanium Joe, -. 18 sq ft titanium sheet ...
7.
Team Scavenger's Heavyweight - Condor
Next parts were a Dalton torque limiter machined to fit the motor shaft, a 24 inch disk of 6061 T651 aluminum machined to fit the Dalton hub and a pair of ...
8.
Steve’s Turbine Powered Airboat Project
Build an airboat powered by a turboshaft engine and a variable pitch .... Though certified for fuel on an airboat engine, the valve was not rated for the ...
9.
Steve’s Turbine Powered Airboat Project
Though certified for fuel on an airboat engine, the valve was not rated for the pressure generated by the pump (pegs my 300 PSI gauge). ...
10.
Steve’s Turbine Powered Airboat Project
Build an airboat powered by a turboshaft engine and a variable pitch ... Locate or build an airboat hull of proper size and weight for the thrust produced. ...