1.
DOT Classification of Explosives - Class 1
Department of Transportation (DOT) Tests used to determine a Class 1 Explosive from the UN Manual of Tests and Criteria.
2.
HAZard and OPerability (HAZOP) Anaysis Block Flow Diagram
Guide words for flow in a chemical process include High Flow, No/Low Flow, Reverse Flow, ... "Typical HAZOP conducted by Safety Management Services, ...
3.
HAZard and OPerability (HAZOP) Anaysis Block Flow Diagram
A HAZOP, or HAZard and OPerability analysis, is a structured technique in which a multi-discipline team performs a systematic study of a process using guide ...
4.
HAZard and OPerability (HAZOP) Anaysis Block Flow Diagram
Use this HAZOP flowchart to determine whether process deviations can result in a potential ... Guide words for flow in a chemical process include High Flow, ...
5.
Mechanical Integrity
SMS can assist in development of complete written mechanical integrity programs based on good engineering practice and plant experience.
6.
Mechanical Integrity
Equipment pieces where Safety Management Services, Inc. (SMS) can provide the maximum assistance with Mechanical Integrity plan implementation includes: ...
7.
Mechanical Integrity
Equipment pieces where Safety Management Services, Inc. (SMS) can provide the maximum assistance with Mechanical Integrity plan implementation includes: ...
8.
In-Process Simulation of Explosives - Test Series 3
Tests to determine whether the material should be considered a high explosive or a lower explosive.
9.
In-Process Simulation of Explosives - Test Series 4
Tests to determine additional explosive characteristics that are used to define in-process parameters.
10.
MIL-STD-882B Hazard Risk Assessment Matrix
This risk matrix developed by the DoD is used to assign a qualitative (relative) hazard ranking to a process deviation.
