1.
X-brace install
Figure 4 shows a large undercar view of Tim installing a nutsert on his '93 325is. You can see the stock brace, the oil pan and the drivers side control arm ...
2.
X-brace install
This page is mainly an effort to explain how you can install the BMW nutserts (Ron used a different brand) without having to purchase a special tool. ...
3.
X-brace install
Next put one of the uncut washers on the bolt. Then the cut washer so that the cuts face away from the other washer. Now screw the nutsert onto the bolt ...
4.
X-brace install
1 socket wrench w/ 13mm socket and 17mm socket; 1 13mm open end wrench (a ... BTW, there are reinforcement pieces for the rear 2 bolts on the brace but I ...
5.
BMW Links
UUC Motorworks (UUC) - www.uucmotorwerks.com. Bimmer World - www.bimmerworld.com. The Ultimate Garage - www.ultimategarage.com. Community and Resources ...
6.
BMW Links
UUC Motorworks (UUC) - www.uucmotorwerks.com. Bimmer World - www.bimmerworld.com ... The BMW UUC Digest - www.uucdigest.com ...
7.
The Kansas City Chapter's 2000 driving school at Heartland Park topeka
The Kansas City chapter of BMW CCA held its annual driving school at Heartland Park in topeka Kansas July 22-23, 2000. I was fortunate enough to attend as ...
8.
BMW Links
BMW Links. Common acronyms for some companies are in parentheses. This page has been shortened significantly. ... Ben Liaw's BMW Links - www.bmwlinks.com ...
9.
10.