1.
SIEMENS M20 GSM INSTRUCTIONS
SIEMENS M20 GSM INSTRUCTIONS. TO CONNECT OZLINE 4VC to SIEMENS M20 MODEM PLEASE FOLLOW THE FOLLOWING INSTRUCTIONS. 1 Connect SIEMENS M20 to a PC via a ...
2.
3.
4.
5.
VCL MAXCOM 8 to OZLINE RS232 PORT
There are two ways of controlling VCL domes via OzLine transmitters: 1. Direct connection to the VCL dome head using RS485 commands from the port on an ...
6.
VCL MAXCOM 8 to OZLINE RS232 PORT
There are two ways of controlling VCL domes via OzLine transmitters: 1. Direct connection to the VCL dome head using RS485 commands from the port on an ...
7.
VCL MAXCOM 8 to OZLINE RS232 PORT
Note the VCL dome nedds to be RS485 enabled and the VCL drivers VCL tpp must be loaded to the OZcam folder. Set Camera ID. This may be one out on early ...
8.
VCL MAXCOM 8 to OZLINE RS232 PORT
Control of domes via Maxcom VCL controllers with RS232 input. Make up the cable connecting D connector on specially prepared OzLine 4, 12 unit to RS232 mini ...
9.
SIEMENS M20 GSM INSTRUCTIONS
1 Connect SIEMENS M20 to a PC via a serial cable 9 to 9 pin and power up (pin one RJ11 6 is 12vDC + pin 6 is GND pin 4 is 12vDC +. ...
10.