|
1.
Z-One Digital IBA Forums :: View topic - I2C Adapter 6 posts - 3 authors - Last post: Mar 23, 2007The ZM00056-KIT is Power-One’s USB to I2C Adapter and is available ... Q. Can you use the ZM7300 evaluation board as a USB to I2C adapter? ... 2.
Z-One Digital IBA Forums :: View topic - Designing ATCA Power ... 1 post - 1 author - Last post: Mar 29, 2007Posted: Thu Mar 29, 2007 7:00 pm Post subject: Designing ATCA Power Subsystems ... Download. Filename: ATCA-EPN.pdf. Filesize: 358.81 KB ... 3.
Z-One Digital IBA Forums :: View topic - I2C Adapter 6 posts - 3 authors - Last post: Mar 23, 2007We haven’t tried the iPort/USB, but it sounds like it might work. We are looking into getting one to try it as well as some other options. ... 4.
Z-One Digital IBA Forums :: View topic - I2C Rise Time Question 2 posts - 2 authors - Last post: Apr 11, 2006Trd = desired rise time (10% to 90%) Trm = measured rise time (10% to 90%) Set the desired rise time to 800 ns to exceed the 1 us ... 5.
Z-One Digital IBA Forums :: View topic - SPICE and IBIS Models 1 post - 1 author - Last post: Jun 26, 2006SPICE and IBIS models are available at the Power-One web site. The SPICE models are averaged models of the Z-One 1000 and 7000 Point-Of-Load ... 6.
Z-One Digital IBA Forums :: View topic - I2C Rise Time Question 2 posts - 2 authors - Last post: Apr 11, 2006What can I do if the rise time of the I2C lines (SCL and SDA) on my board is not meeting the < 1us requirement of the I2C spec? ... 7.
Z-One Digital IBA Forums :: View topic - Designing ATCA Power ... 1 post - 1 author - Last post: Mar 29, 2007Designing ATCA Power Subsystems ... http://www.epn-online.com/page/40705/designing-a3tca-power-subsystems.html ... 8.
Z-One Digital IBA Forums :: View topic - I2C Communication Issues ... 1 post - 1 author - Last post: Dec 14, 2007A clamp on current probe can be used to evaluate common mode currents in the I2C data cable. If the CM current is notably increased when the ... 9.
Z-One Digital IBA Forums :: View topic - I2C Communication Issues ... 1 post - 1 author - Last post: Dec 14, 2007The I2C cable should be kept to the original 1m length (as provided in the ZM00056-KIT I2C to USB adapter) or shorter. ... 10.
Z-One Digital IBA Forums :: View topic - Reset -> I2C Timing 2 posts - 2 authors - Last post: Sep 11, 2006How long after I release the hardware reset of the ZM7300 device do I have to wait before the I2C bus will respond? ... |
