1.
My 0wn Hydraulic Press
I found a hydraulic press design in the Zenair Newsletter no. 44 (January 1988). While I could have built that design, I was hesitant because my dies are ...
2.
Disassembly
Aug 10, 2000 ... The oil varnish on the side of the piston hole makes it hard to pull the pin out. I did not see the Subaru piston pin removal tool, ...
3.
My 0wn Hydraulic Press
I found a hydraulic press design in the Zenair Newsletter no. 44 (January 1988). While I could have built that design, I was hesitant because my dies are ...
4.
My 0wn Hydraulic Press
I found a hydraulic press design in the Zenair Newsletter no. ... Being quite slow, it took me 4 hours to build it (I designed as I built). ...
5.
Subaru Engine
As you'll see, my 20-year old EA-81 engine (from a 1983 Subaru GL with ... rebuilders that provide complete engine package with the reduction drive. ...
6.
EA-81 Engine Pictures
Engine Mount Pictures Only. DCP02181.JPG (92551 bytes) · DCP02182.JPG (107155 bytes) · DCP02183.JPG (105117 bytes) · DCP02184.JPG (95887 bytes) · DCP02185. ...
7.
Installing
Aug 18, 2003 ... In Canada, many auto-part vendors deal with Autoline, a shop in Manitoba that rebuilds carburetors. The Autoline number for this carburetor ...
8.
Initial Fiberglass work
Aug 10, 2000 ... Fiberglass Lay-ups: Here is something that made me scratch my head for a while. Again, there are various ways of laying up fiberglass ...
9.
Ventilation
Aug 10, 2000 ... This is the vent system I purchased. It costs 60$US (plus s&h). Included are two naca vents, flange adaptors, eye ball vents (large ones) ...
10.
Reduction Drive
A belted redrive allows me to simplify the engine installation by keeping the ... Initially, I was not able to fit the reduction drive on my engine because ...
