1.
FOAM-TECH: Case Studies - Exterior Cavity Walls Applications
Use spray polyurethane foam as the insulation rather then other materials on the market like rigid foam boards. Brick ties are attached to the exterior ...
2.
FOAM-TECH: Case Studies - Exterior Cavity Walls Applications
Spray polyurethane foam has the application flexibility and insulation properties that make it the best choice for exterior insulation applications. ...
3.
FOAM-TECH: Building Envelope Theory - Vented vs. Un-vented Roofs
There are traditionally four main reasons for venting a roof: ... Un-vented roofs operate on the principle that moisture entering the roof assembly can be ...
4.
FOAM-TECH: Cost Reduction Case Studies - AVA Gallery and Art Center
The Board of Directors chose to “build green” and adhere to LEED (Leadership in Energy and Environmental Design) standards. Banwell Architects of Lebanon, ...
5.
FOAM-TECH: Cost Reduction Case Studies - AVA Gallery and Art Center
A high-performance building envelope can reduce initial construction costs where buildings utilizing conventional insulation technologies cannot. ...
6.
Timber-frame insulation options
The exposed beams and boards will be the interior finish when construction is complete. Whalers on the outside of the roof prior to injection of the foam. ...
7.
FOAM-TECH: Problems = Solutions - High Moisture
Solutions. Indoor Pools, Moisture, and Related Problems ... High levels of relative humidity, in conjunction with indoor temperature changes, create moist ...
8.
FOAM-TECH: Building Envelope Theory - Noise Reducing Barriers
Foam and other fibrous insulation materials can be used effectively in reducing airborne sound. By filling the cavity inside an isolation wall or ceiling ...
9.
FOAM-TECH: FAQ - Installation
Question: What is the application range of injection foam? Answer: For each inch of cavity space, the injection foam expands one foot vertically. ...
10.
Injected Foam
Exterior sheathing shall be installed prior to the injection of foam from the inside. Unless otherwise specified, a vapor retarder/slip sheet is required ...