1.
BL8.2.1: Changing or checking cryostream settings - BCSB Wiki
Mar 5, 2008 ... BL8.2.1: Changing or checking cryostream settings. For beamline 8.2.1, the cold stream controller (Cryojet Controller from Oxford ...
2.
BL5: No X-Rays in Hutch - BCSB Wiki
Feb 7, 2008 ... In BOS, click the Close Hutch button. This command opens the main dss shutter, drives the detector to 250 mm from the sample, and moves the ...
3.
BL8.2.1: Detector won't move - BCSB Wiki
Aug 29, 2008 ... Make sure the detector cover has closed completely. From the Hutch page in BOS, you can click on the detector cover icon to close and open ...
4.
BL8.2.1: Detector image won't show up in BOS - BCSB Wiki
Aug 20, 2008 ... It should look like the image below. You will have to use a step-stool to see the monitor.: 3. Select the different detectors by pressing ...
5.
BL8.2.1: Goniometer moving slowly or stuck - BCSB Wiki
Mar 5, 2008 ... the Gonio Pmac. In the text field, type $$$ and then hit enter. Rephase the goniometer. See solution #4, above. ...
6.
Ring Status - BCSB Wiki
Ring Status. [edit] Current ALS Ring Status. alsgeneral.gif. Retrieved from "http://bcsb.als.lbl.gov/wiki/index.php/Ring_Status" ...
7.
Staff Listing - BCSB Wiki
Cell Phone: (510) 813-4148. Fax: (510) 486-5664. Email: CYRalston@lbl.gov. Peter Zwart, Staff Scientist Responsible for Beamlines 5.0.1, 5.0.2, and 5.0.3 ...
8.
Automounter - BCSB Wiki
The Automounter is an automated cryogenic crystal mounting system that is aimed at high-throughput macromolecular crystallography by increasing experimental ...
9.
BL8.2.2: Software won't start - BCSB Wiki
May 12, 2008 ... Wait until you have the prompt again, then type startBOS.csh ... Open up a new terminal window and type stopBOS.csh Wait until you see the ...
10.
BL8.2.1: Software won't start - BCSB Wiki
Aug 21, 2008 ... Symptom: After typing BOS, you get an error such as "waiting for java adapter" or BOS hangs and won't start properly. ...
