|
1.
Trench Adapter and Retrofit Valve Box Insert File Format: PDF/Adobe Acrobat - View as HTML Both the valve box and the extension stem adjust to grade in a matter of seconds, ... Valve box is sealed from mud, dirt, and gravel. • Top extensions are ... 2.
Mechanical Joint Pipe Accessories - American Ductile Iron Pipe ... +Gasket weights shown here are for standard SBR rubber; other available rubber types are shown in Table No. 2-6. *14"-48" Mechanical Joints are for fittings ... 3.
Gate Valve Troubleshooting - ACIPCO Resilient seated gate valves per AWWA C515 have a zero allowable leakage rate. If a leak is detected while testing, it is necessary to find the cause. ... 4.
4"-48" Tapping Valves - ACIPCO The mating valve flange to the tapping sleeve outlet must have a raised male face, conforming to MSS SP-60, to ensure true alignment of valve and tapping ... 5.
Ball Joint Pipe Assembly Instructions - American Ductile Iron Pipe ... Coat entire ball and the exposed surface of the gasket completely with the AMERICAN Joint Lubricant for underwater installation which is furnished with the ... 6.
Dimensions, Weights, and Short Lengths - American Ductile Iron ... AMERICAN Flanged Pipe Companion Flanges for Use On Ductile Iron Pipe ... Pipe O.D. in. Minimum Length** in. Maximum Length** ft.-in. Weight in Pounds ... 7.
Boltless Ball Joint Pipe for Water and Sewage - American Ductile ... ++Does not include lining weight. Underwater pipe weights are for fresh water. Sea water is approximately 3% heavier than fresh water, and these weights ... 8.
Pipe Progress Fall/Winter -- Pipe Down In The Valley As has been the case with other utility districts near Tennessee’s larger cities, the Harpeth Valley Utilities District (HVUD) can no longer be thought of ... 9.
Welding Instructions - American Ductile Iron Pipe - ACIPCO (See Ductile Iron Pipe section.) It is imperative that field cuts for restrained joint welding be smooth, regular, and as square as possible with the axis ... 10.
ACIPCO Ductile Iron Pipe - ACIPCO What is ACIPCO Ductile Iron? The ideal of cast iron with ductility, ... of 420 N/mm2 tensile strength, 300 N/mm2 yield strength, and 10% minimum elongation. ... |
