1.
The Lead Sheet Association // Sand Cast Sheet
The Romans first used sand cast sheet for water ducts and storage tanks. Its use was extended by the Normans to include roofing applications. ...
2.
The Lead Sheet Association // General Information
When designing and installing lead sheet, due consideration must be given to the following areas ... Cladding to dormer windows. Many other specialist uses, ...
3.
The Lead Sheet Association // Chimney Flashings
Health & Safety · Standard lead Sheet Sizes · Maximum Recommended Sizes of Sections, Bays and Panels · Fixing of Lead Sheet Flashings ... Chimney Flashings ...
4.
The Lead Sheet Association // Specification Sheets
Step flashings in code…… in lengths not exceeding 1500mm with end-to-end lap joints of not less than 100mm. The 25mm turn in to each step to be lead wedged ...
5.
The Lead Sheet Association // Fixing of Lead Sheet Flashings
Health & Safety · Standard lead Sheet Sizes · Maximum Recommended Sizes of Sections, Bays and Panels · Fixing of Lead Sheet Flashings · Soakers and Step ...
6.
The Lead Sheet Association // Specification Sheets
Lead is only suitable for clips in sheltered locations. The thickness of the sheet used should not be less than the thickness of the flashing. ...
7.
The Lead Sheet Association // 3R - Clips to Free Edges (vertical ...
Clips to Free Edges (vertical cladding) ... 8R - Cover Flashing at Abutment (lead clips welded) ... 19R - Cover Flashing at Roll/Abutments 3deg to 10deg ...
8.
The Lead Sheet Association // Specification Sheets
Lead-lined gutters are used where a lead-covered flat roof, or a tiled or slated roof, is designed with a parapet wall. They are also used where a flat or ...
9.
The Lead Sheet Association // Roll and Drip Joints
Health & Safety · Standard lead Sheet Sizes · Maximum Recommended Sizes of ... Flat Roof Roll and Drip Intersections · Pitched Roof Joints and Fixings ...
10.
The Lead Sheet Association // Roll Joints
Health & Safety · Standard lead Sheet Sizes · Maximum Recommended Sizes of Sections, ... Joints and Fixings at Laps · Roll Detail at Drips and Abutments ...