1.
The Ultimate Predator - 隼 Hayabusa: Engine Cylinder Bore Honing
Read on for the process of engine cylinder bore honing. .... a boring bar and then hone in the usual manner to achieve the desired dimensions and finish. ...
2.
The Ultimate Predator - 隼 Hayabusa: Showa's Big Piston Front
The Ultimate Predator - 隼 Hayabusa ... The Showa front forks are appended BPF, which stands simply for Big Piston Forks, and Kawasaki claims improved ...
3.
The Ultimate Predator - 隼 Hayabusa: Spark Plugs - Some technical ...
Spark plugs are one of the most misunderstood components of an engine. Numerous questions have surfaced over the years, leaving many people confused. ...
4.
The Ultimate Predator - 隼 Hayabusa: Showa's Big Piston Front
Showa's Big Piston Front. Previously mentioned on the blog of Project Radial Front, I've showed that it's possible to swap out the aging Hayabusa front end ...
5.
The Ultimate Predator - 隼 Hayabusa: Engine Cylinder Bore Honing
The process that people then to neglect when dropping in piston is the honing/preparation of the cylinder itself. Read on for the process of engine cylinder ...
6.
The Ultimate Predator - 隼 Hayabusa: Engine Cylinder Bore Honing
Ring manufacturers are concerned that some engine rebuilders may not be using the proper honing procedures or stones for their rings. Too rough a bore ...
7.
The Ultimate Predator - 隼 Hayabusa: Engine Cylinder Bore Honing
Many shops bore or rough hone cylinders to within .003 inch of final oversize (.010 to .030 in. depending on the application), then finish hone the last ...
8.
The Ultimate Predator - 隼 Hayabusa: Engine Cylinder Bore Honing
Cylinder bore refinishing is a time-consuming and expensive step in the engine rebuilding process. So anything that can be done to reduce honing costs and ...
9.
The Ultimate Predator - 隼 Hayabusa: Engine Cylinder Bore Honing
For these reasons, many production engine rebuilders (PERs) have switched to diamond honing. Diamond lowers their honing costs per cylinder, ...
10.
The Ultimate Predator - 隼 Hayabusa: Engine Cylinder Bore Honing
Cylinder bore refinishing is a time-consuming and expensive step in the engine rebuilding process. So anything that can be done to reduce honing costs and ...
