1.
K6OQK FMT METHODOLOGY
For the FMTs I use a GPS referenced HP-3586B as my receiver. One of the things you quickly discover about the HP-3586 series SLM receivers is that the 1850 ...
2.
W6OQI FMT METHODOLOGY
One of the outputs from the distribution amplifier feeds the external reference input of the HP 3586B selective level meter. Another output feeds the ...
3.
K6OQK FMT METHODOLOGY
For the FMTs I use a GPS referenced HP-3586B as my receiver. One of the things you quickly discover about the HP-3586 series SLM receivers is that the 1850 ...
4.
W6OQI FMT METHODOLOGY
The conversion oscillators within the HP-3586 are derived from the time base. This means that for an incoming signal that is exactly on the "tuned-to" ...
5.
First K5CM FMT
i.e.- Sudden FMT, K5CM, 3550300.307 Hz, 7055034.7 Hz. I will try to have the results posted within 48 hours after the test.
6.
K5CM WEBSITE
K5CM. K5CM FMT:. Although most can measure the frequency of WWV or CHU, and they are great to use for calibration and adjustment, they do little to improve ...
7.
December 10, 2008 Results
Dec 10, 2008 ... K5CM FMT - December 10, 2008 Results. Transmit frequencies in Hz. K5CM. 160 Meters - 1846081.460 (9:15 pm CST) ...
8.
KTBZ 1430 AM Tulsa, OK 25 KW day, 5 KW night Time in UTC Noise ...
KTBZ 1430 AM Tulsa, OK 25 KW day, 5 KW night. Time in UTC, Noise, peak amp sig, peakf-mark, Error in Hz, Real Frequency. 1/4/2008 18:13, -66.6, -25.2 ...
9.
May 16th Results
Used both frequency counter and SpecLab to take data. ... and after the run (using WWV 10 MHz) and then did a linear interpolation between the two cal ...
10.
w1aw fall 2008 fmt
Spectrographs of W1AW FMT Fall 2008 FMT. Absolute RF frequencies to the left of zero are higher and frequencies to the right are lower. ...
