1.
Atmel 89C51CC POD rev. A
File Format: PDF/Adobe Acrobat - View as HTML 18 19 20 21 22 23 24 25 26 27 28. The PLCC44 pinout. Pin descriptions for PLCC44: Pin Signal. Pin Signal. Pin Signal. Pin Signal ...
2.
Intel 8031/Dallas 80320 POD rev. D1
File Format: PDF/Adobe Acrobat - View as HTML Target POD pinout is T_QFP44 and the standard DIP40. Also the connection to the PLCC44 pinout is available by using a special target adapter. 43 41 39 37 35 ...
3.
iSYSTEM AG - winIDEA links
In general, the customers should use winIDEA 2008 version except if it's requested by the iSYSTEM R&D department to use specific winIDEA 2009 version. ...
4.
Motorola 68EC000 ActivePOD rev. C
File Format: PDF/Adobe Acrobat - View as HTML Trace Buffer Depth. 64k frames. This POD is connected to the ActivePOD Emulator Unit II. Motorola 68EC000 ActivePOD, bottom view. Emulated CPU. 68EC000 ...
5.
Motorola 68332 POD rev. D1
File Format: PDF/Adobe Acrobat - View as HTML POD Hardware Reference. Motorola 68332 POD rev. D1. iSYSTEM, August 2001. 4/8. Ordering code. IC20100. POD Speed (MHz). 16. 25. Emulator Speed (ns) ...
6.
ARM Cortex family iCARD Debug module
File Format: PDF/Adobe Acrobat - View as HTML If these instructions are not followed, damage to the iCard or the. Emulator can occur. Note: Despite using the same format, iCARDs are not pin compatible ...
7.
MC9S12X family iCARD Debug module
File Format: PDF/Adobe Acrobat - View as HTML The iCARD plugs into the PCMCIA-style card slot of the. iC3000 unit. Features like on-chip-, in-system programming and programming voltage generation are ...
8.
ActivePRO POD NEC 78K0/Fx2
File Format: PDF/Adobe Acrobat - View as HTML A green LED is lit when the ActivePRO POD is powered on. PIN1 location on every component ... 80 78 76 74 72 70 68 66 64 62. 79 77 75 73 71 69 67 65 63 61 ...
9.
iTRACE Probe MPC55xx/MPC551x/MPC56xx
File Format: PDF/Adobe Acrobat - View as HTML 3.3V. The minimal VRef is 1.8V. Target Debug Connector Pinout. The iTRACE probe has a 38-pin Mictor connector, which is the default target connector. ...
10.
iC1000 V2.3.cdr
The iC1000 currently supports the following micro- controller families by PowerPODs supporting in-circuit emulation. Check our web site for the most recent ...
