|
1.
Tag - VIOS - blog'o thnet Jul 9, 2007 ... Important note:Don't forget to add a new virtual SCSI I/O module (of server type) on the VIOS in order to connect to the just created VIOC. ... 2.
Tag - VIOS - blog'o thnet Jul 9, 2007 ... Update the VIOS installation software with the external bundle pack, if available. Reboot the VIOS using the profile named normal (whi ... 3.
Comparison: EMC PowerPath vs. GNU/Linux dm-multipath - blog'o thnet Keep in mind that without purchasing an appropriate EMC license, PowerPath can only be used in failover mode (active-passive mode). ... 4.
Tag - gmirror - blog'o thnet Apr 22, 2006 ... As a side note, i just have to remove the old gmirror .... Slice: 4096 Flags: NONE GenID: 0 SyncID: 1 ID: 770137303 Providers: 1. ... 5.
Tag - gmirror - blog'o thnet Apr 22, 2006 ... As a side note, i just have to remove the old gmirror configuration, .... 512 Mode: r1w1e1 State: SYNCHRONIZING Priority: 0 Flags: DIRTY, ... 6.
Installing a VIOS from the HMC Using a backupios Archive File ... Then, to install the VIOS partition using a previously generated backupios tar file, issue a command similar to the following: ... 7.
Installing a VIOS from the HMC Using a backupios Archive File ... Last, here are some welcome tuning configuration steps: Update the VIOS installation software with the external bundle pack, if available. ... 8.
Configuring an APC Back-UPS RS 800VA - blog'o thnet Jul 9, 2006 ... I recently installed and configured an APC Back-UPS RS 800VA, which is an UPS ... Using the FreeBSD's ports collection and a recent FreeBSD ... 9.
Getting Emulex HBA Information on a GNU/Linux System - blog'o thnet Jun 9, 2007 ... cat /sys/class/scsi_host/host0/port_name 0x10000000c94f7dd9 # # cat /sys/class/scsi_host/host0/lpfc_drvr_version Emulex LightPulse Fibre ... 10.
Tag - gmirror - blog'o thnet Apr 22, 2006 ... gmirror forget gm0 # gmirror insert gm0 ad10 # gmirror status Name Status Components mirror/gm0 DEGRADED ad8 ad10 (16%) ... |
