1.
Cargo Lighting
The interior lighting on the Starquests is rather inadequate, especially the rear cargo area. This page will demonstrate how to improve the lighting in that ...
2.
US to JDM Tail Light Mod
3.9 Using a 22-18 gauge tap splice, splice the non-labeled wire coming from the socket to the solid green (G) wire that goes to the other 1157 socket ...
3.
Cargo Lighting
2- 6" Optix Neon Lights; 1- 12" Optix Neon Light; 1ft- 16AWG stranded primary wire (green); 1ft- 16AWG stranded primary wire (yellow); 6- 16-14 gauge tap ...
4.
Cargo Lighting
2- 6" Optix Neon Lights; 1- 12" Optix Neon Light; 1ft- 16AWG stranded primary wire (green); 1ft- 16AWG stranded primary wire (yellow); 6- 16-14 gauge tap ...
5.
US to JDM Tail Light Mod
3.9 Using a 22-18 gauge tap splice, splice the non-labeled wire coming from the socket to the solid green (G) wire that goes to the other 1157 socket ...
6.
US to JDM Tail Light Mod
This is a step by step procedure on how to rewire a US spec Starion/Conquest in order to use the Euro/JDM tail lights. Both sets of lights have the same ...
7.
US to JDM Tail Light Mod
This is a step by step procedure on how to rewire a US spec Starion/Conquest in order to use the Euro/JDM tail lights. Both sets of lights have the same ...
8.
Modifications
Wiseco Pistons .030" over; Marnal Head- ported, matched; TEP Cam; Intake Manifold extrude honed; 52mm Throttlebody; Exhaust Manifold- ported, matched, ...
9.
LED Dash Lights
Figures 22 & 23 show the installed clock before (OEM) and after (LED) respectively. Figure 22. Figure 23. 4.8 Remove the AC unit from the dash. ...
10.
US to JDM Tail Light Mod
This is a step by step procedure on how to rewire a US spec Starion/Conquest in order to use the Euro/JDM tail lights. Both sets of lights have the same ...
